LEX PRODUCTS POWERGATE COMPANY SWITCH - SPECIFICATION 1 1020-SPEv2 1. GENERAL 1.1. The Company Switch shall provide a means for the connection of portable electrical equipment in a safe and efficient manner for entertainment, industrial and convention venues. 1.2. The Company Switch shall be available in versions for indoor (Type 1) and outdoor (Type 3R) use. 2. MECHANICAL 2.1. The Company Switch panels shall have an enclosure manufactured of .075 inch cold rolled steel. 2.2. The Company Switch shall not have enclosure dimensions that exceed 20.30" (51.56 cm) W x [ SPECIFY EITHER: NEMA Type 1: 11.65" (25.60 cm) D OR NEMA Type 3R: 13.00" (33.02 cm) D]. 2.3. The Company Switch shall not have enclosure heights that exceed: 2.3.1. 400A panel: 46.50" (118.11 cm) H 2.3.2. 200A panel: 38.50" (97.79 cm) H 2.3.3. 100A panel: 38.50" (97.79 cm) H 2.3.4. 60A panel: 38.50" (97.79 cm) H 2.4. The Company Switch shall include four (4) welded mounting tabs for wall mounting. 2.5. The Company Switch shall be comprised of an upper breaker chamber and a lower wiring chamber. 2.5.1. The breaker chamber shall contain a single main breaker with internal lugs. 2.5.2. The lower wiring chamber shall contain both direct wire lugs and [ SPECIFY EITHER: Series 16 Cam-Type devices OR Series 18 Cam-Type devices OR a IEC 60309 pin-and- sleeve connector]. 2.6. The Company Switch shall be equipped with guards to prevent accidental operation of the main circuit breaker. 2.7. The Company Switch finish shall be [ SPECIFY EITHER: beige OR black] powder coat. 3. ELECTRICAL 3.1. The Company Switch shall have line input connections for 120/208 VAC 3 4-wire and ground service. 3.2. The Company Switch design shall have been Hi-Pot tested at 1500 VAC for a period of no less than one (1) second. 3.3. INPUT 3.3.1. The Company Switch shall have input connections to the main circuit breaker, neutral and ground using internal lugs that can accept up to 500MCM (300mm

2

) wire. 3.3.2. The ground connection ships from the factory secured to the enclosure. The ground may be isolated from the enclosure. This is a field modification.

Next Page