Lex offers custom logo marking for PowerRAMP Cable Protectors and CableGuard Cable Covers. These markings are created using an insert in the mold itself and are permanent. When used, custom logos will appear in place of the PowerRAMP logo on the lid of the PowerRAMP and on the tread in place of the Lex Products logo on the Cable Guard. This document covers the size and locations of the logo inserts, as well as the required artwork formats to create the inserts. Location and size: The logo insert placements and dimensions are as shown: Artwork Formats: Lex can work with most vector formats including AutoCAD (DWG/DXF), Encapsulated Postscript (EPS), Postscript (PS), Scalable Vector Graphics (SVG) or CorelDraw (CDR/CMX). Please make sure to hatch areas if using DWG or DXF files.
Note: JPG, TIFF or other raster graphics files are not supported. Lex Products cannot accept any artwork that is in these formats, including if the format is layered within a vector format image (e.g. a JPG within a DXF file). Lex Products accepts no responsibility for creating, modifying, or editing logos or logo formats. We will work with our customers to recommend graphic artists should one be required.
Artwork Colors: Please format all artwork in black and white. Text or graphics in black shall be raised, also known as positive. This is relative to any whitespace, which is depressed or known as negative. Gradients: The process does not permit gradients. See example below. Text Size: Due to the nature of the manufacturing process, finely tuned details such as letters and curves do not typically appear as detailed on the actual product as they do in a graphic format. Therefore, it is necessary to have a minimum text height and width, as well as a minimum spacing between a positive/raised/black and negative/depressed/white logo. These specifications are: Minimum text height: 0.25 inch (1/4) Minimum text width: 0.0625 inch (1/16) Minimum distance between positive/negative spaces: 0.031 inch (1/32) Lead Times: Two weeks after receipt of approved materials.
Good Not Usable Gradient Present
PowerRAMP Cable Protection System Logo Guidelines
Lex Products 11 Forest Parkway Shelton CT 06484 203.363.3738 203.363.3742 Fax Lex West 12701 Van Nuys Blvd Suite Q Pacoima, CA 91331 818.768.4474 818.768.4040 Fax www.lexproducts.com firstname.lastname@example.org 800.643.4460
Copyright Lex Products 2020 Produced in the United States of America All Rights Reserved. Lex Products logo and lexproducts.com are trademarks or registered trademarks of Lex Products in the United States, other countries, or both.
7.50" W x 2.25" H (19.05 cm W x 5.72 cm H) 5.63" W x 1.38" H (14.30 cm W x 3.50 cm H)
Lex South 15751 SW 41st Street Suite 300 Davie, FL 33331 954.888.1024 954.888.1026 Fax