SPEC DATASHEET
PowerGATE ReadySwitch X
Rotary Manual Transfer Switch w/ Integrated Power Input Panel
Non Service Entrance Rated 100 A up to 600 VAC & 200 A 120/208 VAC
Lex East 11 Forest Parkway Shelton CT 06484 203.363.3738 203.363.3742 Fax Lex West 12701 Van Nuys Blvd. Suite Q Pacoima, CA 91331 818.768.4474 818.768.4040 Fax www.lexproducts.com info@lexproducts.com 800.643.4460
Copyright Lex Products 2022 Produced in the United States of America All Rights Reserved. Lex Products logo and lexproducts.com are trademarks or registered trademarks of Lex Products in the United States, other countries, or both.
Part Number Height Width Depth Weight PXMxxUNx3-KE-KE-x 30.00 76.2 cm 30.00 76.2 cm 16.209 41.17 cm 185 lbs. 83.91 kg
ACCESSORIES Standard Features: Phase Rotation Monitor (units up to 480V): Quickly monitor the total loss of one or more phases and synchronization of phases. Indicator Lights : (2) light emitting diode (LED) indicators for visual confirmation of active power from the outside of the unit, while the door is closed. Optional Features: Stainless Steel construction (316 SS or 304 SS) Strip Heater with Thermostat (2) NEMA 5-20, 20A, 2-pole, 3-Wire, 125 VAC, Weather Resistant Straight Blade Duplex Receptacles protected by GFCI Breakers (1) NEMA L5-30, 30 Amp, 2-pole, 3-wire, 125 VAC, locking receptacle COMPLIANCE The ReadySwitch X satisfies the requirements of NFPA 70, NEC (National Electric Code): Chapter 7 Special Conditions Article 700 Emergency Systems 700.3 Test and Maintenance Article 702 Optional Standby Systems 702.4 Capacity and Rating 702.5 Transfer Equipment Chapter 4 Equipment for General Use Article 408 - Switchboards, Switchgear, and Panelboards NFPA 110-2022, Chapter 6, Transfer Switch Equipment RECOGNITION Panels shall be cULus Listed with labels secured to the panel. WARRANTY The ReadySwitch X shall carry a full two-year warranty from the time of shipment.
MECHANICAL The ReadySwitch X panels have aluminum rain tight enclosures, rated for Outdoor Type 3R use. Optional: Stainless Steel is available (3X Rated) The enclosure includes four (4) welded mounting tabs for wall mounting. The ReadySwitch X is comprised of an upper switching / termination chamber and a lower wiring chamber. - Upper chamber contains a single transfer switch and lugs for permanent wiring. - The upper chamber has a dead front panel to cover all exposed electrical parts. - Lower wiring chamber contains 16 Series Cam-type male devices for temporary input connections. Hinged bottom access doors open inward for Cam-type connections and NEMA accessory access. The bottom access door is spring loaded which provides a strain relief for cables exiting the bottom of the chamber. The ReadySwitch X has an outer access door with a pad lockable handle, preventing unauthorized access. Temporary cables enter and exit the wiring chamber from access holes in the bottom of the enclosure so that all cabling drapes downward when connected. The ReadySwitch X finish is grey powder coat. ELECTRICAL The ReadySwitch X has line input connections for up to 600 VAC 30 4-wire and ground service. The ReadySwitch X design has been Hi-Pot tested at 2200 VAC for a period of no less than one (1) second. Input - Input 1 Connections to transfer switch: Compression single wire terminals for HOT phases, wire range: 1 x 6 AWG - 300 MCM, - Double wire terminals for NEUTRAL and GROUND, wire range: 2 x 2 AWG - 600 MCM - Input 2 Temporary connections: Industry standard 16 Series Cam-type devices Output Compression single wire terminals for HOT phases, wire range: 1 x 6 AWG - 300 MCM, - Double wire terminals for NEUTRAL and GROUND, wire range: 2 x 2 AWG - 600 MCM **Dimensions for Non Service Entrance Rated 100 Amp up to 600 VAC and 200 Amp 120/208 VAC**
Lex South 15751 SW 41 Street Suite 300 Davie, FL 33331 954-888-1024 954-888-1026 Fax
Previous Page