POWERFLEX EVERGRIP MOLDED SIX-CIRCUIT MULTI-CABLE ASSEMBLIES - SPECIFICATION (continued) 2 1020-SPEv2 1.7.5. Lengths [SPECIFY EITHER TBD OR as scheduled] 1.8. Multi-cable assemblies shall be available as adapters 1.8.1. Adapters shall be designated as Break-Ins (Fan-Ins) or Break-Outs (Fan-Outs) 1.8.1.1. Break-Ins shall consist of six (6) plugs (males) into a single multi- pin overmold connector (female). 1.8.1.2. Break-Outs shall consist of a single multi-pin overmold plug (male) to six (6) connectors (females). 1.8.2. Adapters shall be fabricated using six (6) individual runs (tails) of 12/3 (#12 AWG, 3 Conductor) SJOOW cable 1.8.2.1. Lengths [SPECIFY EITHER TBD OR as scheduled] 1.8.3. Adapters shall be available in multiple plug and connector configurations: 1.8.3.1. 515 - NEMA 5-15 Parallel Blade ('Edison'), 15 Amp, 125 VAC 1.8.3.2. SP - Stage Pin, 20 Amp, 120 VAC 1.8.3.3. L520 - NEMA L5-20 Locking, 20 Amp, 125 VAC 1.8.3.4. L6-20 - NEMA L6-20 Locking, 20 Amp, 250 VAC 1.8.3.5. Plug/connector [SPECIFY EITHER TBD OR as scheduled] 2. ELECTRICAL 2.1. [Should have language here that explains in specification language the limitations of multi-cable capacity.] 3. WARRANTY 3.1. Multi-cable extensions and adapters shall be warranted against overmolded device failure resulting from pushed pins, broken conductors, and broken ground rings within the connector, or other defects of material or workmanship, for a period of five (5) years from date of purchase. 3.2. Cable assemblies under warranty will be either repaired or replaced at the manufacturer's option. 3.3. Cable wear and tear or product misuse or abuse is NOT covered by warranty. 3.4. Damaged pins or contacts resulting from making or breaking connectors under load is a misuse of the product and not covered under warranty. 4. QUANTITIES 4.1. Provide overmold multi-cable extensions and adapters in quantities and configurations as scheduled. 5. APPROVED MANUFACTURER AND PRODUCTS
Previous Page